Home - Return to Previous Page
WARNING: This product may expose you to a chemical none as DINP and/or other chemicals that are listed by the state of California to cause cancer and/or reproductive harm. For more information go to www.P65Warnings.ca.gov
Ford 1953-1956 Door Panels Kit - Fits Ford F Series Pickups
240
Fits Ford Pickup original doors 1953-1956
4 Styles Available for the Bottom section
3 Material Families - Vinyl, Tweed, Velour
4 Styles Available for the Bottom section
3 Material Families - Vinyl, Tweed, Velour
Availability: Made To Order
Shipping: Made To Order - Ships in about 3 weeks
Pricing:
$235.00
Description
Ford 1953-1956 Door Panels:
* Die cut boards to original Ford, Board is .100" thick special chip board made with water resistant glue and PVC coating both sides.
** Separate 1953-1955 version and 1956 version die cuts
*** Top section typically in Vinyl, no stitching. Typically matches Boxing of Seat Upholstery kit
**** Bottom section can be made in the following styles and in any material. Typically matches Face/Face Inserts of seat upholstery kit
Options:
*4 Bottom Styles Available -
1. Channel Style - Double needle pleats widely spaced
2. "SS" Vintage 2-Tone "Stock Style" - No Pleats, No Stitching
3. "D" Designer center Face Bolster - Single needle narrow spaced vertical pleats
4. "VS" Vintage Squares Face Inserts - Square pattern pleats
3 Material Families - Vinyl, Tweed, Velour
Material/Color Choices for Top and Bottom sections
Made with Premium Automotive grade upholstery vinyl and fabrics.
Made with 1/4" Sew Foam for pleated or cushioned look
Comes with Plastic clips designed to use in existing holes in doors. Used back side of panels to make a template to drill holes if your truck does not have original holes (only original higher trim levels had door panels).
Fits original Ford truck door for the year range stated
We recommend an experienced installer do the installation.
This is a custom Made-to-Order item, No Return allowed
Guaranteed to fit the original make/model/year range
* Die cut boards to original Ford, Board is .100" thick special chip board made with water resistant glue and PVC coating both sides.
** Separate 1953-1955 version and 1956 version die cuts
*** Top section typically in Vinyl, no stitching. Typically matches Boxing of Seat Upholstery kit
**** Bottom section can be made in the following styles and in any material. Typically matches Face/Face Inserts of seat upholstery kit
Options:
*4 Bottom Styles Available -
1. Channel Style - Double needle pleats widely spaced
2. "SS" Vintage 2-Tone "Stock Style" - No Pleats, No Stitching
3. "D" Designer center Face Bolster - Single needle narrow spaced vertical pleats
4. "VS" Vintage Squares Face Inserts - Square pattern pleats
3 Material Families - Vinyl, Tweed, Velour
Material/Color Choices for Top and Bottom sections
Made with Premium Automotive grade upholstery vinyl and fabrics.
Made with 1/4" Sew Foam for pleated or cushioned look
Comes with Plastic clips designed to use in existing holes in doors. Used back side of panels to make a template to drill holes if your truck does not have original holes (only original higher trim levels had door panels).
Fits original Ford truck door for the year range stated
We recommend an experienced installer do the installation.
This is a custom Made-to-Order item, No Return allowed
Guaranteed to fit the original make/model/year range
CA Prop 65
WARNING: This product may expose you to a chemical none as DINP and/or other chemicals that are listed by the state of California to cause cancer and/or reproductive harm. For more information go to www.P65Warnings.ca.gov
Details
- 240
- 240
- Seatz Manufacturing
- Made To Order
- New
Categories
Shipping Information
- Item Requires Shipping
- 10.0 lbs.
- W34.0000” x H26.0000” x L2.0000”
- This item ships in its own box.
- Made To Order - Ships in about 3 weeks
